Gages Features:
- Ring gages are solid; Plug gauges are Taper lock- double ends with one handle. our solid ring gages can be used directly, no need setting plug gages to test them in advance. The advantage of Taper-lock style is when one end worn out, one new end can be replaced quickly and easily. The handle and end in good condition can be used again.
- There are two kinds of British Pipe Threads, one is BSPT(R), another is BSPP(G). BSPP (G) threads are cylindrical with parallel threads non-sealing. BSPT threads are taper with sealing function. These threads are widely used in plumbing and pipe fittings. British pipe threads come from British Whitworth threads.
- BSPP G thread gages inspection environment: standard temperature 20 ºC ± 1 ºC, standard conditions measuring force is zero.
How to Use?
Use of BSPP G Thread Ring Gauges: Product external threads should be inspected using qualified thread ring gauges. Thread plug gauges should comply with the relevant provisions of GB/T 3934-2003. To reduce disputes during inspection and acceptance, it is recommended that manufacturers, inspectors, and acceptors use the same qualified gauge. If using the same qualified gauge is difficult:
- Manufacturers should use new or minimally worn through-end ring gauges and end-end ring gauges with wear close to the wear limit; inspectors and acceptors should use through-end ring gauges close to the wear limit and end-end ring gauges that are new or minimally worn.
- Through-end thread ring gauges (T) with a full dome profile and (TB) with a full flat-top profile should be threaded through when used to inspect the effective pitch and major diameters of product external threads.
- End-end (Z) thread ring gauges with a truncated profile should not exceed two full thread pitches when used to inspect a single pitch diameter of a product external thread. D. If the thread ring gauge used to determine the product’s external threads meets the applicable standards, the product’s external threads are considered qualified.
- Unless otherwise agreed, thread ring gauge acceptance is based on the calibration of thread plug gauges and adheres to the requirements of Sections A, B, C, and D.
- Single-parameter thread ring gauge inspection reports can be provided upon order request.
Gages Certification:
Long form calibration certificate from ISO17025 accredited lab can be provided, but it need to be told in advance, and need extra costs.
Special Order:
1) We also can provide custom production service for special CUSTOM thread gages, for example, Special diameter, special pitch, pre-plated and left hand etc. Usually we need 3~4 weeks to finish special ring gauges, and ten days to finish special plug gages. Only one pc is acceptable.
2) SuperSize thread Gages is available, till to Max Size: 1000 mm, come with long form calibration certificate.
3) We can provide laser marking service on the gauges. For example, clents’ Logo.
4）We can provide full parameter working ring gauge with gage inspection report according to order requirements. But the prices will be requested.
Please Contact: sales@gagedepot.com
Reviews
There are no reviews yet.